Polyethylene Plastic Water Tanks On Orr & Orr, Inc.

Registered Users – Sign In

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items


All Categories > Plumbing Equipment > Polyethylene Plastic Water Tanks > View Items


	Polyethylene Plastic Water Tanks
	Check up to five results to perform an action.

	larger image		Water tanks should always be stored out of direct sunlight & protected from freezing. The tanks should be installed at room temperature, with complete support under the tank. The tank must be supported on one side & end with 1/2" to 3/4" plywood, or equivalent, & strapped securely in position. Tanks with a capacity of 30 gallons or more should be totally enclosed. When determining location of fittings, make sure all tubing & fittings are installed so that all stress is eliminated. Use elbows to prevent partial bending or collapsing of the fill, drain, or vent tubing when a change in direction is required. Almost all fittings should be “spun” or “heat-welded” into the tank for proper sealing. Such compounds as sealants, pipe dopes, greases, petroleum jellies, glues, or other adhesives are not compatible with polyethylene. Should you desire to test the tank, fill with water & check visually. Do not use a soap or detergent solution as the solution will cause stress cracking in the plastic. (All tanks are blank with no holes.) While supplies last

Compare Items

Add To Cart

Request Quote

Results Per Page :


Results 1 - 3 of 3		1

	Item #		Item Name		Capacity		List Price

	H-9851		Water Tank - 59 Gal.		59 Gal.		$98.75

	H-9852		Water Tank - 85 Gal.		85 Gal.		$142.95

	H-9853		Water Tank - 100 Gal.		100 Gal.		$149.25


Results 1 - 3 of 3	1