ATO / ATC Fuses and Accesories On Orr & Orr, Inc.

Registered Users – Sign In

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items


All Categories > Electrical Products/Switches > ATO / ATC Fuses and Accesories


	ATO / ATC Fuses and Accesories

	Click on a Product to view details.


		ATC Blade Type Fuse Panel (2) Wiring: Output terminals - .250 x .032 OC rated 30A max. per circuit; Input terminals - #10-32 stud input rated 150A max. Material: Black, UL rated 94VO thermoplastic, -20°F to 150°F. No top cover needed.




		ATO/ATC Fuse Block (4) ATO/ATC blade fuse holder slip-on terminals. Cases accommodate 2 to 12 fuses. Clear acrylic dust cover with bolt-style screw included




		ATO/ATC Fuse or Circuit Breaker Panels (4) ATO/ATC fuses or plug-in circuit breakers. #10.32 stud terminal with hex nut, flat washer and lock washer supplied. Four .218 diameter mounting holes for #10 screws.




		ATO/ATC In Line Fuse Holder & Fuses (13)




		In-Line Fuse Retainers and Fuses (4) Assembled with moulded phenolic bodies. Fuse supplied.




		Break Apart Fuse Block May be broken apart as needed to obtain desired number of poles. Rated at 20 amp, 300 volts, for 1/4 x 1-1/4" fuses.




		Frame Ground Tap/Side Mount Terminal Tap For simple and reliable connection of accessory ground leads. Attaches directly to battery side terminal. Up to 3 slip -on terminals can be connected to each triple tap. Can be stacked.




		Fuse Holder In-Line ATO/ATC 30-amp fuse holder accepts 12-gauge wire. Fuse included




		Fuse Holder In-Line ATO/ATC or Mini (2) In-line blade fuse holder with water resistant cover and loop length of 5 1/2". Both are stackable. Fuse included




		Fuse Taps (3) Taps clip onto existing fuses to provide an additional connection point for slip-on terminals. Taps installed at "cold"end is protected by existing fuse "hot" end requires additional in-line fuse.




		Tap Terminal/Ground Tap For simple and reliable connection of accessory ground leads. Attaches to top post cable bolt without bolt removal. Up to 3 slip -on terminals can be connected to each triple tap. Can be stacked.




		Tapa Circuit with Dual Fuse Holder Turns one fuse slot into two. Plugs into occupied or vacant energized fuse block slot. Provides one fuse holder to protect existing circuit, and a second fuse holder to protect new circuit. 16 ga. lead for new circuit is 5" long and includes insulated crimptype coupler.