• H8146

    This cargo control series features a 10' track length and a shoring bar. See details below.

  • H8179

    Strength: 50,000 Lbs. minimum yield

    Track may be attached with screws, rivets, or welded.

    • In order to ship via UPS 10' pieces need to be cut, please specify, H-8178 can ship UPS

  • H8181
  • H8194

    We feature a restraint bar and a cargo bar holder. See product descriptions below.

  • H9404

    Drop Forged from C-1045 steel supplied with mounting bracket.

  • H-9411

    • Provides convenient D Ring tie down where needed
    • Fits common flush and outside stake pockets
    • 1/2" forged D Ring
    • 1/2" hitch pin with cotter

  • M-5749

    • Transport and Binder Chain
    • Safety Latch & Grab Hooks
    • Clevis Links

  • H9735

    • Ratchet Straps
    • Rubber Rope
    • Tarps
    • Rope Hooks
    • Turnbuckles

  • H9729

    • Web Winches
    • Brake Winches
    • Winch Straps

  • H9419

    Forged heavy web construction - 360° swivel. Proof tested at 100% greater pull than the working load limit. Binders meet Federal and D.O.T. requirements.

  • H9424

    Binders meet Federal and D.O.T. requirements. Proof tested at 100% greater pull than the working load limit.

  • M6656

    The harder the pull, the tighter the lock. Cannot turn or work loose. Fits from 6-12" without chain or hooks. Set of 4, chrome plated

  • M1308

    Rails are either bolted or screwed into desired location. Adjust the tie-down position by lifting the spring loaded locking pin and sliding it to the desired self locating hole. Attaching a rope or strap secures the load. Rails are black anodized,  May be cut for custom installations. Set includes two rails and four slide lock clips. Extra slide lock clips can be ordered.

  • H9861

    Heavy duty tie down. Can be bolted to floor, or welded to steel cross members. Rotates full 360° for best tensioning in use. Comes with drain holes.

  • H9472

    Heavy duty tie down. Capacity rating 6,000 lbs. Can be bolted to floor, or welded to steel cross members. Rotates full 360° for best tensioning in use.

  • H9397

    For 1/4" plywood. Manufactured from 16 ga. steel. Solid one piece construction dish design assures strong retention of 1/4" dia. D-ring. 3 1/2" dia., 2 mounting holes for 1/4" screws.

  • H8038

    Ring recessed in plastic cup. 1/4" dia. steel ring.

  • H9659
  • H8065

    Designed for 3/8" Plywood Lined Vans. Rope ring has a 3/8" recessed pan, therefore, can be mounted and fastened directly into frame.

  • H8067

    Holes for No. 12 F.H. attachment screws

  • H9641

    Light duty 1/4" tie down ring and clamp. Clamp 1-3/8" hole to hole in length.

  • H9785

    With screws, steel; sets flush with floor, eliminating possibility of tripping.