Catalog

Also available in 1-1/4 x 6 & 1-1/4 x 9 on special order.

 

Back of plate to center of hole3-1/2"
Hole center to front of collar 2-1/2"
 Takes 5/8" Hitch Pin

Black powdercoat finish

Casters not included

Note: When a jack is used in conjunction with a caster, the caster limits the capacity of the jack caster system to 1,000 pounds.

Pivoting screw type tongue jack is easily rotated to a horizontal towing position. Zinc Plated. Large corrugated poly grip handle. Tough polypropylene wheel. Fits square tongues up to 3" x 5". Can be adapted for round tongue mounting. Packed one per carton.

Easily rotated to towing position by spring loaded double pin locking mechanism. 10" travel.

Sidewind

Drop leg jack with standard disc foot.

13.50" additional drop leg extension.

With crank. 12,000 lbs. support capacity

For leveling Rv's and other vehicles

High Strength
One Piece
Steel Pin
Zinc Plated

This locking hitch pin provides security for your trailer, boat or other towing equipment. Two sizes are available to fit most hitches.Our 5/8 pin is used on 2 receivers while the 1/2 pin is used on 1 1/4 receivers. Chrome plated steel with protective cover and two keys.

Availabe in zinc or stainless steel. In stainless pins the pin, wire and clips are all 300 Series Stainless Steel

Hairpin provides positive locking; Each pin complete with hairpin.

• Includes one Safety Latch Clevis Hook
• Grade 43 and 70 Plus
• Total length 35"

• Supplied with S hook on each end
• Grade 30 Plus

Assembly comes complete with coupler, 3 or 5 position channel and fasteners

• Heavy duty steel construction.
• Multi-position mounting in either 3 position, 5 position channel.
• Zinc-plated easy latch mechanism allows for quick engage/disengage of coupler.

Adjustable Ball Coupler, formed steel channel - 1/2" thick complete with coupler channel and fasteners. May bolt or weld mounting plate only.

Use Grade 8 - 5/8" bolts (not included)

Durable Plastisol resists oil & grease. Designed to lock firmly in place.

The TRI-BALL offers black or chrome balls in all three towing ball sizes (1-7/8", 2" & 2-5/16") on one solid shank.
The ADJUSTABLE TRI-BALL has the same features as the tri-ball, plus the versatility of 12" of vertical adjustment. Chrome balls are standard on the adjustable tri-ball.

• Low profile Latch
• Adjustable for up and down movement to fit Trailer
• Removable so it does not interfere with salt spreading equipment, etc.

With dual locking assembly. Ball sizes - 1-7/8", 2", 2-5/16"

• Finish - Black/Chrome Ball
• Individually boxed
• Max. Vertical Load - 3000 lb.
• Do not weld or modify

The dual purpose hitch makes it possible to use a tow ring or a ball coupler. When in use, always have the latch in closed position with the cotter pin in latch.

Note: All sizes of dual purpose hitch balls are interchangeable. They are not a standard hitch balls

• Fits standard 2" tow bar.
• Receivers mounting plate punched for pintle hook height adjustment

Pintle hook not included.

• Plate 5" wide
• Shank 2" solid steel
• Hole Dimensions 1/2" x 1"

Cushioned rigid pintlehook with or without plunger and air cylinder.

• Takes 5/8" Hitch Pin
• Shank 2" solid steel
• Double Locking Latch
• 1 7/8", 2", or 2 5/16"
• Chrome Ball 1" Shank
• American Made

For use with Drawbar eye dimensions: 2-3/8" to 3" with 1-1/4" to 1-5/8" diameter. To be mounted on a plate of at least 3/4" thick. Do not weld. Note the differences in the forged latch assemblies between the 15 and 25 ton.

Features 3 Towing Balls and a Pintle Hook on 1 Solid Steel Shank

• Black powder coated shank fits 2" recievers
• 5/8" hitch pin holes
• 1-7/8", 2", 2-5/16" welded chrome balls
• 7,500 lbs. cast steel pintle jaw
• Upper jaw locks in the open (up) position for coupler towing with the 2" ball.
• Upper jaw locks in the closed (down) position for lunette eye towing.

Extra length allows the handling of extra wide tires or wider tongues of custom built trailers. Fits either 4 or 5 hole rims. M-1718 comes with locking bracket and padlock.

Common Measurements:

B = 6"  C = 4 1/2" F = 2"

Do not weld or modify

 

• Rugged zinc plated trailer locking device. • Fits all 2-1/2" - 3" lunette eyes. • Accepts most 1/2" dia. padlocks.

Adjustable forged eyes, formed steel channel - 1/2" thick, complete with eye, channel and fasteners.

American made.

Forged light duty tow hook in chrome or Black Powder Coated finish.

Sold in Pairs

Straight, front end, heavy duty tow hook.

Industrial

Drop Forged and heat treated with alloy pins. Screw pin type -Forged steel shackles that feature an open-throat design that permits free line movement without undue wear. Screw pin shackles require no special tools to assemble.
Meets Federal Specifications RR-C-271 Type IVA, Class 1.

Commercial

Consumer grade screw pin anchor shackles are upset forged and formed. These shackles are used in numerous farm, home, boating, or other lightduty activities. Hot dip galvanized for rust protection.

• 3" side rails keep cargo in
• Black enamel powdercoat finish
• Mesh surface allows for easy cleanup
• Corner markers help provide visibility
• Attachment holes help secure loads
• Angled design ensures max. clearance

Assemblies include: Back Plate, Shoe and Linings, Magnets, Actuating Lever, Adjusting Screw and Spring Hardware. Units are assembled.