Catalog

Wiring: Output terminals - .250 x .032 OC rated 30A max. per circuit; Input terminals - #10-32 stud input rated 150A max.
Material: Black, UL rated 94VO thermoplastic, -20°F to 150°F.

• No top cover needed.

ATO/ATC blade fuse holder slip-on terminals. Cases accommodate 2 to 12 fuses. Clear acrylic dust cover with bolt-style screw included

ATO/ATC fuses or plug-in circuit breakers. #10.32 stud terminal with hex nut, flat washer and lock washer supplied. Four .218 diameter mounting holes for #10 screws.

Assembled with moulded phenolic bodies.
Fuse supplied.

May be broken apart as needed to obtain desired number of poles. Rated at 20 amp, 300 volts, for 1/4 x 1-1/4" fuses.

For simple and reliable connection of accessory ground leads. Attaches directly to battery side terminal. Up to 3 slip -on terminals can be connected to each triple tap. Can be stacked.

30-amp fuse holder accepts 12-gauge wire. Fuse included

In-line blade fuse holder with water resistant cover and loop length of 5 1/2".
Both are stackable. Fuse included

Taps clip onto existing fuses to provide an additional connection point for slip-on terminals. Taps installed at "cold"end is protected by existing fuse "hot" end requires additional in-line fuse.

For simple and reliable connection of accessory ground leads. Attaches to top post cable bolt without bolt removal. Up to 3 slip -on terminals can be connected to each triple tap. Can be stacked.

Turns one fuse slot into two. Plugs into occupied or vacant energized fuse block slot. Provides one fuse holder to protect existing circuit, and a second fuse holder to protect new circuit. 16 ga. lead for new circuit is 5" long and includes insulated crimptype coupler.