Catalog

For multi-battery applications as a solenoid priority system. Protects chassis charging system from excessive loading, allowing auxiliary batteries to be charged.

The battery seperator has two basic operational  characteristics: Assist in engine starting and Protects the charging system.

• 2, 4 and 6 gauge meets SAE J1127 specifications
• 8 gauge meets J1128
• Conductor is 100% stranded copper
• Rated at 60 volts or less
• Packaged on spools
• RoHS Compliant

• Heavy duty 20' long Booster Cables
• 2 gauge and 1/0 gauge available

• Full gauge copper conductor
• Tough, high temperature PVC insulation - abrasion and chemical resistant
• Recommended for connecting battery to switch, starter and ground
• For use at 60 volts or less
• Meets SAE J1127 specifications
• Temperature rating of 105° C (221° F)

All copper-heavy duty-designed for easy attachment.

• 100% Copper Welding Cable.
• High stranding and EPDM jacket for greater cold weather flexibility.
• Excellant abrasion resistance.
• For Group 31 stud batteries.

Charging post sets-one positive, one negative, greatly facilitate charging of ST batteries. Posts have 3/8" threaded stud to screw into side terminal batteries for easy charging with conventional charging equipment.

4 gauge or 0 gauge cable input with two additional 8 gauge power leads for automotive accessories. Quickly make or repair battery cables. Designed to fit positive and or negative battery terminals. For use with a variety of applications

Converts conventional post type battery for marine use or any clamp type application.

Fit #1 to 4/0 gauge cable

Fit #6 to 00 gauge cable

Attaches easily & swiftly to battery tray or fenderwell.

Universal mounting hardware is included.

2 years limited warranty.

• Ideal for maintaining automotive, RV and motorcycle batteries.
• Fully automatic with complete shutoff.
• 20" output cords mount permanently to battery terminals.
• Rugged molded, sonic sealed case is resistant to water, gasoline, oil, solvent & acid.

Standard battery tester instantly reveals battery charge. Tests all 6, 12, and 24 volt systems. Instuctions are Imprinted on product.

Built in thermometer for accurately reading condition of battery fluid. Plastic housing.

Easy to install on negative battery post. Battery is disconnected by unscrewing the knob a few turns, and reconnected by tightening the knob. Available with or without fused bypass

Key turns 90° to instantly connect or disconnect battery. Key is captive in "on" position and removable in "off" position. Weatherproof cover included. Incorporates flange for panel mounting from front or rear.