-
Die cast cam with set screws
Set screw cam allows for complete adjustability of rods- With die-cast cam with set screw
- With steel 36" rods, yellow zinc finish
- With nylon rod guide
- Accepts 5/16" square shank
-
For use with rods or cable. Zinc plated.
-
Note: Can be furnished in Zinc finish and/or 48" rods. On special order.
-
All steel lock allows entire length of pipe to cam over to secure doors. Handle has permanently affixed vinyl grip and is riveted, not bolted to handle lug for added security. Bushing assembly supplied with nonremovable pin for maximum security. Supplied less pipe and padlock. Zinc plated. Individual parts available on special order.
-
All steel lock allows entire length of the pipe to cam over to secure door. Supplied with hinge type pipe holders. Handle has permanently affixed vinyl grip and is riveted to lug for added security.
-
Single flap, flat cup. Flush mounting handle. Heavy duty 3/8" rods, 36" long. Trouble-free operation, with two flush bolts. Locking or non-locking.
Finish - zinc.
Hansen No. 2-1-ESR Non-Locking.
Hansen No. 2-1-ESLR Locking. -
Single flap, flat cup. Flush mounting handle. Two point with rods and rod guides. Sturdy anti-rattle steel guides. Locking or non-locking.
Finish - zinc
Hansen No. 2-1-DR Non-Locking.
Hansen No. 2-1-DLR Locking. -
Folding handles with concealed Stainless Steel Spring holds handle in the folded position to prevent rattling. Shanks offset for mounting locks close to edge of doors. Rods attached or detached with unusual ease.
For compartment doors requiring dead-bolt action. Non Locking. -
Folding handle with concealed Stainless Steel Spring which holds handle in the folded position to prevent rattling. Shanks offset for mounting locks close to edge of doors. Rods attached or detached with unusual ease.
-
Steel construction for use with 5/16" or 3/8" rods. Finish: Zinc
-
Steel round rod, zinc plated for use with rod locks.
-
-
Typical applications: Camper shells and metal enclosures
Zinc plated center control and rods. Rods attach to center mechanism with rivets. Accepts 5/16" shank. -
Application on all type doors, from flush to offset. Ideal for side doors. H-5255
Frost-breaking cam action.
Positive double-action handle, seal plate & seal pin.
Bridge-type keeper to prevent accidental opening.
Mounting bolts & 3/4" standard pipe not furnished.
Universal keepers not available in stainless steel. -
This simple effective strike is intended for use with many mechanisms having 5/16" diameter rods, which normally operate as dead bolts. Zinc die cast, stainless steel spring.
-
Universal Tool Box Lock. For tool box or small door. Attaches to inside. Fastened in place by screw at each end, or can be spot welded to metal door.
