Emergency / Safety Lighting on Orr & Orr, Inc.

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items


All Categories > Lighting > Emergency / Safety Lighting


	Emergency / Safety Lighting
	Click on a category to drill down.


		Strobe Lights 12 Volt Low Profile (3) Mounting Base: ABS plastic, 3-hole, metal mounting ring & O-ring seal Mount: Permanent or magnetic Lens: Polycarbonate screw-off Flash Tube: Xenon field replaceable Joule Rating: 1 FPM: 60 ± 10 Single Current Draw: .25AMP max Output Power: 1 Watt Polarity Protected: Diode Certifications: Class III, UL and CE approved




		Strobe Light - High & Low Profile (12) Mounting Base: Aluminum, combination 1” NPT or permanent mount & rubber gasket seal Mount: Permanent or magnetic Lens: Polycarbonate, 4 screws Flash Tube: Xenon field replaceable Joule Rating: 10 FPM: 80 ± 10 Double Voltage: 12-24VDC Current Draw: 2.5AMP max @ 12.8VDC / 1.7AMP max @ 24VDC Output Power: 13.5 Watts Polarity Protected: Diode Certifications: Class II, SAE J1318, CE




		LED Beacons (4) Mounting Base: ABS plastic, epoxy encapsulated & 3 hole Lens: Polycarbonate Profile: Low Lamp: 5 LEDs per head FPM: 60 ± 10 Quad Current Draw: .1AMP avg Size: 5" Diameter x 3.63" High Certifications: UL and CE approved




		Mini Bars Rotator and LED (4) Permanent Mount Mounting Base: Polycarbonate, foam gasket Lens: Polycarbonate Voltage: 12VDC




		Material Handling Strobe (6) Mounting Base: Nylon plastic, epoxy encapsulated, 2-hole & O-ring seal Mount: Permanent, magnetic or pipe mount Lens: Polycarbonate screw-off Flash Tube: Xenon field replaceable Joule Rating: 2 FPM: 75 ± 10 Single Voltage: 12 - 80 VDC Current Draw: .5AMP max Output Power: 2.5 Watt Polarity Protected: Diode Certifications:Class III, SAE J1318,UL and CE approved




		Material Handling LED Beacon (6) Mounting Base: Nylon plastic, epoxy encapsulated & 2 hole Mount: Permanent, magnetic or pipe mount Lens: Polycarbonate Profile: High Lamp: 6 LEDs per head FPM: 60 ± 10 Quad Current Draw: .1AMP avg Certifications: UL and CE approved




		Surface Mount LED Modules (12) Multi-module synchronization Simultaneous or alternate flashing Built in selectable flash patterns Interior and exterior use




		Rotating Halogen Light Single parabolic reflector Integral mounting options include external, internal and 1" pipe mount without removing lens Exceeds SAE J845 Class I 1 yr warranty (6 mos bulb) Available in blue, clear and green on special order




		Double Flash Strobes Low or Medium Profile (2) Field selectable high or medium intensity and single or double flash 2 yr warranty (6 mos. flash tube) Meets SAE J1318 Class I, II or III Die cast aluminum base Integral internal, external or 1" pipe mounting Available in blue, green & clear on special order.




		Snow Plow Lights (6) Sold in kits or Driver and Passenger side only




		Driving Light Kit Popular OE style, 55-watt halogen clear driving light features matte black ABS housing and hardened-glass lens. Designed for mounting in most factory and aftermarket air dams or can be mounted on top or bottom of bumper. Kits include two lights, wiring, rocker switch, and installation instructions. Meets SAE specifications.




		E-Z Mount Towing Lights Two (2) 12V lightweight plastic light heads with hinged flaps that hook into trunk of car, 20' of flat wire with 4-prong flat plug. For use in RV's with car in tow, trailers, Boats in tow, or any general towing.




		Heavy Duty Towing Lights Standard or L.E.D (2) Magnetic Mount Heavy Duty Commercial Non-scratch Magnetic Base 30' power cord W/4 Way Round Plug Shock proof rubber light housing Exceed D.O.T. Standards 7' cord between Lights Red Lens Optional plastic carrying case (M-7252) Light Boots Protection against Scratches Slip over Magnetic Base Two (2) boots per package Does not reduce holding power of magnet




		Light and Heavy Duty Hazard Flashers (4) Self contained units sits upright or attaches to any metal surface. Uses 4 AA batteries (Not included). Available in Red/Amber or Amber on both sides.




		Towing Lights Magnetic Two (2) 12V lightweight plastic light heads with magnetic bases, 20' of flat wire with 4-prong flat plug and a 4-hole flat socket. For use in RV's with car in tow, trailers, Boats in tow, or any general towing.




		Reflectors




		Safety Director™ Multiple user selectable flash patterns Meets SAE J595 requirements 2 yr warranty ( 6 mos. bulb) LED display on control box replicates flash pattern inside vehicle Eight individual lamps Control box and “L” bracket mounting kit included